3D ACA 520 Finishing Polish 946 ml

3D ACA 520 is an innovative paint polish designed for fine polishing and finishing purposes. This polish, known by the abbreviation 3D 520, is produced by 3D Products in the USA. With 3D 520, paint defect corrections can be polished to a high gloss in a very short time after heavy-cut polishing passes. 3D 520 is water-based and contains "Alpha Ceramic Alumina" polishing agents that allow for a significantly extended processing time. It's suitable for both soft single-layer paints and hard clear coats. 3D 520 is free from fillers and can be fully removed even with mild paint degreasers.

Hologram-free, crystal-clear finish with 3D ACA 520 High Gloss Polish

3D 520 can be used both eccentrically and rotationally, leaving a crystal-clear, hologram-free finish. Ideally, 3D 520 is used after a heavy-cut or medium polishing step, like the 3D ACA 510 or a comparable polish. 3D ACA 520 becomes clear shortly after application, allowing for a clear view of the paint. 3D 520 is characterized by a very extended processing time and is cost-effective to use due to the very late breakdown of the polishing agents into small particles.

Very easy application: 3D ACA 520

3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and is easy to wipe off. It's recommended to use 3D 520 sparingly to avoid potential excess. We recommend using 3D with softer finishing foam pads.