After two years of intensive R&D, it was time to boost the Gyeon coating spectrum to a new level: presenting a technological rEVOlution in the chemical group of polysilazanes, Gyeon has succeeded both in almost doubling the durability and simplifying the application process: wipe off time has been drastically extended with the new EVO formulations.
What's more: all new EVO coatings no longer require a two-layer application but only one single layer, and what's more, they can even be applied outdoors in the fresh air; a garage is no longer a mandatory requirement. The only thing to ensure is a dry place for the following 12 hours and some shade for the application.
Q² Pure EVO is the formula with the highest (i.e. maximum possible 75%) silica content of all Gyeon coatings, which provides an inimitable candy gloss. In the new formulation, the product remains easily buffable within a full 10 minutes after application, making application process an experience.
Q² Pure EVO surprises with its glass-like gloss and is a worthy counterpart to high-quality natural waxes. The fantastic depth of colour and the pure candy effect are accompanied by durable and highly chemical-resistant protection against all kinds of environmental influences. Q² Pure EVO is resistant to chemicals with a pH between 2 and 11 and guarantees easy cleaning of your vehicle.
- Content: 100 ml
- Trader packaging unit: 1 unit
- Durability: up to 36 months or 40 tkm
- Consumption: 30 ml/vehicle
- 1 Stück GYEON Q² Pure EVO 100 ml
- 1 Stück GYEON Q²M Cure 100 ml Q2MCURE100
- 1 Stück GYEON Q²M Coating Applicator
- 1 Stück GYEON Bedienungsanleitung
The better the surface preparation, the better the result in terms of gloss, durability, and water repellency.
- Thorough pre-wash and decontamination with Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay
- Polish all painted surfaces to a high gloss with Q²M Polish and optionally Q² Primer
- Wash the vehicle with a highly degreasing detergent, e.g., dishwashing liquid and hot water
- Remove all dirt, waxes, and oil-based polish residues with Q²M Prep (IPA alone is not enough)
- Shake the bottle, apply a few drops of Q² Pure EVO to the applicator
- Apply in a crosshatch pattern until the layer is rich and even, only work on smaller sections at a time
- After 10-30 seconds, polish off excess with a fresh microfiber towel Q²M BaldWipe to achieve an even finish
- After 1 hour, apply Q²M Cure Spray as a topping and wipe off with Q²M SoftWipe to protect against potential water spots
- Avoid water during the drying time (24 hours), do not wash with car shampoo during the curing phase (14 days)
Be the first to rate! Your review helps us and others!
Your opinion is very important to us! We want to make sure that you are fully satisfied with our car care products. Let us know what you think after you have tested the product and share your experience with our community. Be the first to review this product and help others make the right decision. We are looking forward to your feedback!