Q² Pure is a refined version of the former Q² Prime and replaces it completely. In contrast to the previous formula, Q² Pure comes with increased durability and improved gloss. The thick-applying formula requires only a single coat, making the application process fast and user-friendly. The total amount of silica inside is at a possible maximum of 75%, which provides an inimitable candy gloss. Also increased: the water contact angle or hydrophilicity.
The fundamental characteristic of Q² Pure is its fascinating ease of application. The highly developed silicon-based (SiO2) formula is easy to apply even for beginners and is comparable to the application of natural waxes. Appropriate paint preparation, as is also necessary with waxes, consists of defect correction and surface degreasing, e.g. with Q²M Prep. An ergonomic applicator, which is part of the set, allows you to apply the product quickly and effectively to the lacquer; buffing out is even easier than with a conventional wax.
Q² Pure surprises with its glass-like shine and is a worthy counterpart to high-quality natural waxes. However, the fantastic colour depth and the pure candy effect are only one side of the coin: the durable and highly chemical-resistant protection against all kinds of environmental influences is another main strength of this coating. Q² Pure is resistant to chemicals with a pH value between 2 and 11 and guarantees easy cleaning regardless of the car wash method chosen. It is even resistant to aggressive chemicals from a car wash.
Q² Pure and its easy one-coat application make it the technologically advanced and chemical resistant alternative for natural and synthetic wax products. It has been developed to bring together the expectations of different user groups and its application requires only a comparable level of technique and effort as the application of a natural car wax, even for enthusiasts.
-Durability: up to 18 months or 30tkm.
-thickness: 0,2-0,5µm
-pH tolerance: 2-11
-contact angle: >110
-hardness: +2H
-Consumption: 30 ml/vehicle
-Single-layer coating, layering possible
-1 piece GYEON Q² Pure 100 ml
-Instructions for use
The better the surface is prepared, the better the result in terms of gloss, durability and beading effect.
-Thorough pre-wash and decontamination with Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay.
-Polish all painted surfaces to a high gloss with Q²M Polish and, if necessary, Q² Primer.
-Wash the vehicle with a strongly degreasing detergent, e.g. dishwashing liquid and hot water.
-Remove all dirt, waxes and oily polish residues with Q²M Prep (IPA alone is not enough).
-Shake bottle, put a few drops of Q² Pure on one end of the suede cloth wrapped around the applicator
-Apply in straight parallel and overlapping lanes until the layer is rich and even, working on smaller sections at a time
-Wait for the coating to set (approx. 20-30 seconds) and level the product with the same applicator side in circular movements. Work until there is an even haze on the surface. Do not add any more product to the applicator. The circular motion is crucial for easy and straight wiping. It also has a very important function in levelling any high spots.
-After circular levelling, wipe immediately with the Q²M SOFTWIPE in the same circular motion, alternating the sides of the microfibre cloth.
-After 1 hour, apply Q²M Cure Spray as a topping and wipe off with Q²M SOFTWIPE to protect against possible water spots.
-Avoid water during the drying time (24 hours), do not wash with car shampoo during the curing phase (14 days).
Be the first to rate! Your review helps us and others!
Your opinion is very important to us! We want to make sure that you are fully satisfied with our car care products. Let us know what you think after you have tested the product and share your experience with our community. Be the first to review this product and help others make the right decision. We are looking forward to your feedback!