SONAX Headlight Restoration Set 85 ml

• 1 piece of SONAX Headlight Polish 75 ml
• 2 pieces of SONAX Headlight Sealant 5 ml
• 2 pieces of SONAX Polishing Sponges
• 1 piece of SONAX Sanding Disc Holder
• 8 pieces of SONAX Sanding Discs P3000
• 8 pieces of SONAX Sanding Discs P5000
• 6 pieces of SONAX Polishing Cloths

1. Smoothing

• Before starting, wash the areas to be treated with SONAX Gloss Shampoo
• Then, tape off the edges near the hood, fenders, grille, and bumper
• Attach the slightly coarser P3000 sanding discs (with clear adhesive backing) to the included gray sanding disc holder, moisten with water, and sand the headlights with light pressure until a uniform, slightly matte surface is achieved
• Keep the surface moistened with water throughout
• Next, remove any sanding residues with one of the included polishing cloths
• Then repeat the process with the ultra-fine P5000 sanding discs (with red adhesive backing)

2. Polishing

• Apply SONAX Headlight Polish to the white side of the included polishing sponge and polish the headlight surface with medium pressure until the haziness is removed
• If needed, reapply polish as necessary
• To check and at the end of the polishing process, wipe off any polish residues with a polishing cloth

3. Sealing

• Open one packet of Headlight Sealant and pour the contents onto a polishing cloth
• Apply the liquid to the already smoothed and polished surfaces with the damp cloth, then after a brief airing, wipe with a clean, dry polishing cloth
• One packet is sufficient for 2 headlights