Silicone-free polish for professional reconditioning of dull and scratched paints, especially scratch-resistant clear coats with rotary or DA polishing machine. Ideal as a finishing polish after the use of a cutting compound.
The use of a new type nano abrasive allows for rapid polishing with good scratch removal while providing high gloss. Leaves no holograms or haze on the paint when used properly. Removes sanding marks from P2500 grit.
Abrasive power: 3 Gloss: 6
- Shake bottle before use.
- Apply product to SONAX Foam Pad medium (04930000) or, for dark problem paints, alternatively use the soft Foam Pad (04932410).
- Polishing process Phase 1: Pressure: 5-10 kg - Speed: 800 rpm - Time: 30 sec.
- Polishing process Phase 2: Pressure: 1-2 kg - Speed: 1500 rpm - Time: 90 sec.
- Time references apply to one polishing pass of an area of approximately 1 sqm of average hard paint.
- Remove residues with SONAX Microfiber Cloth soft touch (04510000).
- Regularly clean polishing pads and never use different polishing agents on one pad.
- Do not apply on hot surfaces.
Be the first to rate! Your review helps us and others!
Your opinion is very important to us! We want to make sure that you are fully satisfied with our car care products. Let us know what you think after you have tested the product and share your experience with our community. Be the first to review this product and help others make the right decision. We are looking forward to your feedback!